Product Introduction
F144M-DC DC Ammeter and Voltmeter with Transmitter Output Features: Used for measuring and transmitting DC signals. The scale panel can indicate temperature, pressure, or other non-electrical quantities (upon user requirements). Indication Accuracy: 1.5 Ω; Output Accuracy: 0.5 Ω; Output Range: DC 10mA, 20mA, 4~20mA, load≤450Ω, DC 5V, 10V, 1-5V, load≥5kΩ; Ambient Temperature: -25℃ to +55℃; Enclosure Protection: IP44 (IP65 with protective cover; must be specified in the order); Vibration Resistance: 2-100Hz, ≤0.7g; Withstand Voltage: AC 2.5kV, 50Hz, 1min; Operating Power Supply: 24Vdc±25%, 100Vac, 200Vac+20%; Power Consumption: ≤2VA
Specifications
F144M-DC DC Ammeter and Voltmeter with Transmitter Output Characteristics:
For measuring and transmitting DC signals.
Scale panel indication can be temperature, pressure, or other non-electrical quantities (upon user requirements).
Indication Accuracy: 1.5
Output Accuracy: 0.5
Output Range: DC 10mA, 20 mA, 4~20 mA, load≤450Ω, DC 5V, 10V, 1-5V, load≥5kΩ
Ambient Temperature: -25℃ to +55℃
Enclosure Protection: IP44 (IP65 with protective cover; must be specified in order)
Vibration Resistance: 2-100Hz, ≤0.7g
Voltage Withstand: AC 2.5kV, 50Hz, 1min
Operating Power Supply: 24Vdc±25%, 100Vac, 200Vac+20%
Power Consumption: ≤2VA
Product Category:
| Model Number | Development Angle | Overall Dimensions | Opening Size | Weight |
| F72M-DCB | 90° | 72*72*120 | 68*68+0.5 | 0.15 |
| F96M-DCB | 96*96*130 | 92*92+0.5 | 0.3 | |
| F144M-DCB | 144*144*133 | 138*138+0.5 | 0.6 | |
| F72M-DC | 240° | 72*72*120 | 68*68+0.5 | 0.45 |
| F96M-DC | 96*96*130 | 92*92+0.5 | 0.5 | |
| F144M-DC | 144*144*130 | 138*138+0.5 | 0.6 |
Instructions for Use:
This instrument is used for indicating temperature and pressure with 4~20mA and other DC signal inputs, and has a transmitter output function.
The terminal block arrangement of the instrument is shown in Figures 1.7 and 1.8. Figure 1.7 shows the F96 and F144 models, and Figure 1.8 shows the F72 model.
There are two potentiometer adjustment knobs on the back of the instrument. The left one is for upper limit full-scale adjustment, and the right one is for lower limit zero-point adjustment. The instrument is set at the factory according to the order requirements; however, users can adjust it themselves if needed on-site.
For special purpose instruments, please add "J" after the first half of the model number (only applicable to 240° instruments). For example, F96JM-DC
