Product Introduction
F96M-AC AC Ammeter and Voltmeter with Transmitter Output Characteristics: Used for measuring and transmitting AC current and voltage. Indication Accuracy: 1.5 Output Accuracy: 0.5 Output Range: DC 10mA, 20 mA, 4~20 mA, load≤450Ω, DC 5V, 10V, 1-5V, load≥5kΩ Ambient Temperature: -25℃ to +55℃ Enclosure Protection: IP44 (IP65 with protective cover; must be specified in order). Vibration Resistance: 2-100Hz, ≤0.7g Withstand Voltage: AC 2.5kV, 50Hz, 1min Power Consumption: ≤2VA Auxiliary Power Supply: AC: Un±15% (Un: 100V, 220V, 380V) DC: 24V±25% Measurement Range: Same as AsF96-AC.
Specifications
F96M-AC AC Ammeter and Voltmeter with Transmitter Output Characteristics: Used for measuring and transmitting AC current and voltage.
Indication Accuracy: 1.5
Output Accuracy: 0.5
Output Range: DC 10mA, 20 mA, 4~20 mA, load≤450Ω, DC 5V, 10V, 1-5V, load≥5kΩ
Ambient Temperature: -25℃ to +55℃
Enclosure Protection: IP44 (IP65 with protective cover; must be specified in order).
Vibration Resistance: 2-100Hz, ≤0.7g
Withstand Voltage: AC 2.5kV, 50Hz, 1min
Power Consumption: ≤2VA
Auxiliary Power Supply: AC: Un±15% (Un: 100V, 220V, 380V) DC: 24V±25%
Measuring Range: Same as AsF96-AC.
Product Category:
| Model Number | Development Angle | Overall Dimensions | Opening Size | Weight | Remarks |
| （A*B*C） | （mm） | （kg） | |||
| F72M-ACB | 90° | 72*72*120 | 68*68+0.5 | 0.2 | Paired with YT-MAC |
| F96M-ACB | 96*96*130 | 92*92+0.5 | 0.5 | ||
| F72M-AC | 240° | 72*72*120 | 68*68+0.5 | 0.4 | Paired with YT-MAC |
| F96M-AC | 96*96*130 | 92*92+0.5 | 0.8 |
Note:
1. The instrument's operating frequency is 50Hz. It can be manufactured to 60Hz or 400Hz according to user requirements. Users must specify this when ordering and confirm it in the contract.
2. Wiring instructions for the instrument are shown in Figures 2.4 and 2.5.
3. The instrument has two potentiometer adjustment knobs on the back. The left knob adjusts the upper limit (full scale) and the right knob adjusts the lower limit (zero). These knobs are pre-set at the factory according to the order requirements; however, users can adjust them themselves if needed on-site.
4. For special-purpose instruments, please add "J" (for 240° instruments) after the numbers in the first half of the model number, such as: F96JM-AC
