Product Introduction
F144M-DCTB Temperature Gauge with Transmitter Output Features: Input Signal: PT100, K-type thermocouple Accuracy: 1.5 Ambient Temperature: -25℃ to +55℃ Enclosure Protection: IP44 (IP65 with protective cover; must be specified in order). Vibration Resistance: 2-100Hz, ≤0.7g Withstand Voltage: AC2.5kV, 50Hz, 1min Operating Power Supply: 24Vdc±25%, 100Vac, 220Vac+20% Power Consumption: ≤2VA Output Contact Capacity: AC250V, 1A, DC28V, 1A Alarm Point Setting: Can be configured with upper limit, lower limit, and peak limit according to user requirements. Measurement range is the same as F96-DCT.
Specifications
F144M-DCTB Thermometer with Transmitter Output
Features:
Input Signal: PT100, K-type thermocouple
Accuracy: 1.5
Ambient Temperature: -25℃ to +55℃
Enclosure Protection: IP44 (IP65 with protective cover; must be specified in order).
Vibration Resistance: 2-100Hz, ≤0.7g
Voltage Withstand: AC2.5kV, 50Hz, 1min
Operating Power Supply: 24Vdc±25%, 100Vac, 220Vac+20%
Power Consumption: ≤2VA
Output Contact Capacity: AC250V, 1A, DC28V, 1A
Alarm Point Setting: Can be configured with upper limit, lower limit, and peak lower limit according to user requirements.
Measuring range is the same as F96-DCT.
Product Category:
| Model Number | Development Angle | Overall Dimensions | Opening Size | Weight |
| （A*B*C） | (mm) | (kg) | ||
| F72-DCTB | 90° | 72*72*120 | 68*68+0.5 | 0.3 |
| F96-DCTB | 96*96*130 | 92*92+0.5 | 0.4 | |
| F144-DCTB | 144*144*130 | 138*138+0.5 | 0.45 | |
| F72B-DCT | 240° | 72*72*120 | 68*68+0.5 | 0.5 |
| F96B-DCT | 96*96*130 | 92*92+0.5 | 0.5 | |
| F144 B-DTC | 144*144*130 | 138*138+0.5 | 0.6 |
Note:
Limit instruments not listed in the specification sheet can also be supplied. Users must specify this when ordering and confirm it in the contract.
See Figure 10.2 for instrument terminal block arrangement.
Users should specify the model, specifications, power supply, alarm values, and other parameters when ordering, and specify and confirm these in the contract.
For special purpose instruments, please add "J" after the first half of the model number (only applicable to 240° instruments), such as F96JB-DCT.
