CB-BM160 GEAR PUMP

CB-BM160 gear pump is applicable to low-pressure hydraulic system, which is used to transport mineral oil with viscosity of 1 ~ 8 ° and oil temperature of 10 ℃ ~ 60 ℃, such as hydraulic oil, mechanical oil and fuel oil. The rotating speed is 1000-1500 rpm. It is applied to the hydraulic system of machine tools, hydraulic machinery and engineering machinery. As the power source of the system, it can also be used as oil transfer pump, lubricating pump, booster pump in thin oil station, metallurgy, mining, petroleum, chemical industry, textile machinery and other equipment For fuel pump.

2. Structural characteristics:

2.1 gear pump is mainly composed of pump body, gear, front cover, rear cover, bearing, framework oil seal and other parts.

2.2 the pump body, front and back cover are made of HT250 gray cast iron, the gear is made of high-grade powder metallurgy, the pump shaft is made of 40Cr combined with steel hardening treatment, the bearing is made of SF-1 oil-free bearing or needle roller bearing, and the seal is made of double lipped butadiene rubber (note: when the oil temperature is 60 ℃ - 200 ℃ or the transmission medium is corrosive, explain when ordering), so that the gear pump has stable working performance, wear resistance and long service life. When using helical gear, the sound will be lower.

3. Pump features:

3.1 small volume, light weight, simple structure, low price and reliable operation.

3.2 it has good self-priming property. It does not need to be filled with oil when starting up and * * it does not need to be filled with oil when using.

3.3 convenient installation, use and maintenance

CB-BM160 GEAR PUMP

MODEL CAPACITY PRESSURE SPEED INLET OUTLET POWER
l/min MPa r/min Kw
CB-BM160 160 2.5 1450 Z 2' M48X2 8.2
CB-BM200 200 10.1
CB-BM250 250 13
CB-BM300 300 15
CB-BM350 350 17
CB-BM400 400 20
CB-BM500 500 M60X2 24

CB-BM160 GEAR PUMP

CB-BM160 GEAR PUMP

Feedback